Last Updated： Aggregation Period:Jan 21, 2026～Feb 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 21, 2026～Feb 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 21, 2026～Feb 17, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 95 items
High corrosion-resistant one-component epoxy resin primer that dramatically improves adhesion to non-ferrous metals (aluminum and SUS).
"Metal Underbond" is a one-component epoxy resin primer that significantly improves adhesion to various metals, especially non-ferrous metals (aluminum and SUS). For more details, please contact us or refer to the catalog.
Exterior, steel furniture, road facilities. Usable for various applications such as industrial machinery! Environmentally friendly powder coating that achieves a beautiful finished appearance!!
"Toa Powder Apres SD" is a polyester resin-based powder coating that uses HAA (Hydroxyalkylamide) hardener, which is gaining attention for its environmental considerations. During the curing reaction, there is almost no generation of yellowing gases such as smoke or tar, and the only byproduct produced during the reaction is water. Therefore, it is recognized as an environmentally friendly coating that is gentle on both people and the planet. 【Features】 - Environmentally friendly and safe coating - Excellent in suppressing yellowing during the curing reaction - Achieves a beautiful finished appearance - Capable of accommodating a wide variety of applications 【Applications】 Exterior: Fences, balconies, carports, etc. Steel furniture: Pipe chairs, lockers, bed frames, etc. Electrical equipment: Distribution boards, lighting fixture reflectors, air conditioners, vending machines, etc. Road facilities: Traffic lights, poles for traffic signs, bicycle parking machines, etc. Vehicles: Automotive parts, undercarriage parts, etc. Industrial: Ducts, fire extinguishers, propane tanks, gas meters, etc. Commercial: Agricultural machinery, chain blocks, etc.
Environmentally friendly powder coating that can be cured at high temperatures in a short time! With excellent post-processing properties, it does not crack or peel even after bending post-coating. Compatible with PCM lines.
A new product, "Toa Powder Apress QB," has been released in the HAA hardening type polyester resin powder coating series "Toa Powder Apress"! It cures quickly due to high-temperature baking, allowing for reduced processing time. Additionally, during the baking reaction, there is almost no generation of yellowing gases such as smoke or resin, which helps to minimize yellowing of the coating film. ◆ High-temperature short-time baking The usual baking condition is 160°C for 20 minutes (object temperature), but it is possible to achieve the properties of the coating film at 190°C for more than 5 minutes! If the object temperature is raised above 200°C, a coating film can be formed in over 60 seconds! ◆ Excellent post-processing properties Even with a coating thickness of 150μm, there is no cracking or peeling of the coating film when bent at a diameter of 2mm at 180°. It can be adapted to various lines, such as pre-coated metal (PCM) lines. When painted on aluminum foil and folded into a crane, there is no cracking or peeling of the coating film. (See image) ◆ Environmentally friendly type It uses an HAA hardener, and there is no volatilization of PRTR target substances during the baking reaction. There is almost no generation of smoke or resin, which helps to minimize yellowing of the coating film and keeps the drying oven clean.
Introducing primer powder coatings based on epoxy resin and epoxy polyester resin designed with consideration for adhesion to topcoats! (Low temperature)
The "Toa Powder #1800 Low Temperature Primer" is a versatile and easy-to-use epoxy/polyester resin-based powder coating. It is available in two colors: New Ivory and Light Gray, and can be purchased in units of 15kg per box. Additionally, we also offer the epoxy resin-based powder coating "Toa Powder #1500 NU-2 Ivory," which has a long-standing track record as a primer. These products are designed with adhesion to topcoats in mind, allowing for the application of various solvent-based topcoats without sanding. 【Features】 ■ Available in two colors: New Ivory and Light Gray ■ Sold in units of 15kg per box ■ Designed with adhesion to topcoats in mind ■ Allows for the application of various solvent-based topcoats without sanding *For more details, please refer to the PDF document or feel free to contact us.
It has high environmental barrier properties and meets the needs for long-term rust prevention measures. It can be painted even in environments at 0°C, and recoating is possible the next day.
The "New Epoxy VH Primer" is a weak solvent-based modified epoxy resin primer that achieves high corrosion resistance by preventing the intrusion of corrosive factors through a high-density formulation of flake pigments. It has excellent drying properties, and by using a hardener suitable for winter, it allows for topcoating even in low-temperature environments of 0°C the day after painting. Additionally, because it is a weak solvent type, it can be overcoated on phthalate resin paints, epoxy resin paints, polyurethane resin paints, fluororesin paints, and more. This contributes to improved work efficiency and shortened construction periods. 【Features】 ■ It has high environmental barrier properties and excellent corrosion resistance, making it suitable for corrosion protection measures for plant equipment and iron towers. ■ It has excellent low-temperature curing properties. ■ It is an environmentally friendly paint that does not contain harmful heavy metals such as lead and chromium. ■ It is suitable for repainting as it does not discriminate against old coatings. *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Among various polyester resin-based powder coatings, the highest level of environmental suitability and excellent film performance!
In recent years, various industries have been shifting from solvent-based coatings to powder coatings, particularly among companies that prioritize consideration for the global environment and initiatives related to the SDGs. The "Toa Powder Apres Series" is a polyester resin-based powder coating that uses HAA (Hydroxyalkylamide) hardeners, which are gaining attention for their environmental considerations. - There is no generation of yellowing gases such as smoke or tar during the curing reaction, which reduces the accumulation of tar stains on the furnace walls. - The by-products generated during the curing reaction are only water, making it an environmentally friendly powder coating that considers both "people" and the "environment." - Of course, it offers rich color reproduction, beautiful vividness, and an excellent finish appearance with smooth thin film properties, free from issues like runs, sags, and pinholes. The lineup includes three types that meet contemporary needs: a type that enables low-temperature curing and contributes to energy savings in drying furnace heat sources, a type that allows for post-processing after curing, and a high weather-resistant type specifically for aluminum building materials! Additionally, depending on the customer's coating line, functional options such as foam suppression and yellowing suppression can also be added! For more details, please contact us, and an experienced representative from our nearest sales department will assist you.
Electrostatic prevention powder coating
This is a type suitable for electrostatic measures that imparts conductivity, based on polyester-epoxy/hybrid powder coatings.
Next-generation technology leading powder coatings.
The adoption of powder coatings with low environmental pollution leads to numerous total benefits, such as improved work efficiency, increased productivity, significant improvements in the working environment, and labor-saving measures.
Fluororesin with excellent weather resistance - the highest standard of coating performance recognized by the world!!
Fluorofine powder coating is the first paint that combines the weather resistance and durability of PVDF resin coatings, which protect the coated objects from various environmental stresses, while maintaining the advantages of powder coatings that are environmentally friendly and highly efficient. Fluorofine powder coating can be applied in a thin film due to newly developed groundbreaking technology, reproducing a smooth surface comparable to solvent-based paints. At the same time, it has a harder surface hardness than solvent-based paints, making the coating less prone to scratches.
NeoFlon ETFE powder coatings meet a wide range of needs in various fields by using a heat-resistant primer that maintains a high level of adhesion.
**Features** ■ Easy Processability Neoflon ETFE powder coating has excellent heat resistance and meltability, allowing it to be fired over a wide temperature range. Additionally, it has a superior balance of resin composition, enabling the application of thick films without sagging. ■ Excellent Surface Properties Compared to conventional ETFE, a smooth and high-gloss coating film can be obtained. ■ High Adhesion Neoflon ETFE uses a high-adhesion heat-resistant primer, providing high reliability as a lining material. *For more details, please contact us.*
Over 300 rich standard colors and four special specifications take powder coating to a new stage.
"KARUMEL" is an environmentally friendly powder coating developed by KCC, a major paint manufacturer in South Korea, with a focus on environmental considerations. This paint addresses the pollution issues caused by solvent-based paints and significantly contributes to reducing environmental impact. Additionally, "KARUMEL" offers a diverse lineup of paints with rich standard colors, including metallic, pearlescent, and stone-like patterns. It overturns the concept of custom "color matching," reducing unnecessary costs. Furthermore, its high recyclability and four special functionalities that surpass solvent paints contribute to achieving the "SDGs goals" aimed at realizing a sustainable society. "KARUMEL," which balances environmental performance with diverse expressiveness, will establish the standard for future paints. **Features of the environmentally friendly powder coating "KARUMEL":** - Over 300 rich standard colors - Quick delivery, available for purchase from one box - Beautiful finish and appearance - High safety with environmental considerations - High durability and heat resistance - High coating efficiency to reduce waste - Approved paint by Hyundai Motor Company *For more details, please refer to the PDF materials or feel free to contact us.*
A new powder coating has been introduced that achieves high corrosion resistance and high weather resistance in a single coat! By combining the primer and topcoat into one coat, it also reduces running costs!
"Econa 52Q" is a high corrosion-resistant and high weather-resistant powder coating primarily composed of polyester and urethane. It demonstrates excellent effectiveness in protecting and maintaining the appearance of metal products used outdoors. **Features of Econa 52Q:** - **Process Reduction:** By using a one-coat system, it is expected to reduce running costs through process shortening compared to traditional two-coat high corrosion-resistant coatings. - **High Corrosion Resistance:** Achieves a salt spray test of 1500 hours with a delamination width of 3 mm or less (on zinc phosphate treated steel), making it suitable for a wide range of outdoor applications. - **High Weather Resistance:** Achieves a gloss retention rate of 70% and ΔE < 1.0 after 1500 hours of xenon lamp exposure, making it suitable for a wide range of outdoor applications. - **Environmental Compliance:** Does not use VOCs (volatile organic compounds).
Low-temperature curing, non-fuming, matte type outdoor powder coating.
"Ekona 51F" is a powder coating that can accommodate materials that are difficult to bake at high temperatures, such as cast iron, due to its excellent low-temperature curing properties. It allows for a smooth, matte finish. The baking time is reduced to half compared to conventional powder coatings, with 20 minutes at 160°C and 10 minutes at 180°C. Additionally, there is no contamination of the baking and drying oven from resin, which can lead to reduced maintenance costs. 【Features】 ■ Excellent low-temperature curing ■ Significantly reduced baking time ■ Environmentally friendly (fuel consumption reduction, no VOCs, etc.) ■ No resin/odor during baking ■ Smooth, matte finish ■ Flexible service support (custom colors in small quantities and short delivery times) *For more details, please download the PDF or feel free to contact us.
Polyester/urethane main component - high smoothness type outdoor powder coating
"Ekona 52A/D" is a powder coating that excels in smoothness and allows for a thin film finish. With a gloss retention rate of 70% after 500 hours using a xenon lamp and passing the salt spray test for over 500 hours, it is suitable for a wide range of indoor and outdoor applications. Additionally, it does not use VOCs (volatile organic compounds) and can reduce substances subject to the PRTR law. 【Features】 ■ Main components: Polyester/urethane; high smoothness type ■ Excellent smoothness, capable of thin film finishing ■ Good coating performance in terms of weather resistance and corrosion resistance ■ Environmentally friendly (no VOCs, etc.) ■ Flexible service support (short delivery times, etc.) *For more details, please download the PDF or feel free to contact us.
Polyester/urethane main component, high weather resistance type outdoor powder coating.
"Ekona 52E" is a powder coating that excels in weather resistance and is suitable for long-term outdoor use. It maintains a gloss retention rate of 70% after 1,500 hours of exposure to xenon lamp light, showing minimal discoloration or gloss reduction even after prolonged outdoor exposure. It has passed the salt spray test for over 500 hours, demonstrating not only excellent weather resistance but also good coating performance in terms of corrosion resistance. 【Features】 ■ Polyester/urethane main component; high weather resistance type ■ Exceptional weather resistance, suitable for long-term outdoor use ■ Good coating performance in terms of corrosion resistance ■ Environmentally friendly (no VOCs used, etc.) ■ Flexible service support (custom colors from small quantities, short delivery times) *For more details, please download the PDF or feel free to contact us.
Polyester/urethane main component - metallic silver powder coating.
"Ekona 52M" is a silver metallic powder coating rich in metallic feel. By simply applying it uniformly within the standard film thickness range (70-90μm), it finishes beautifully. It does not cause repulsion with other coatings and can be used in conjunction with other coatings in the same work area. Metallic finishes are made to order in coarse and medium textures. 【Features】 ■ Main components: Polyester/Urethane ■ Rich metallic feel, silver metallic ■ Good film performance in terms of weather resistance and corrosion resistance ■ No repulsion with other coatings ■ Environmentally friendly (no VOCs used, etc.) *For more details, please download the PDF or feel free to contact us.
Double environmental performance with powder coating and low-temperature curing! Epoxy polyester type suitable for indoor use.
"Ekona 53B" is a powder coating that can accommodate materials that are difficult to bake at high temperatures, such as cast iron, due to its excellent low-temperature curing properties. It reduces the baking time to half compared to conventional powder coatings, with 20 minutes at 140°C and 10 minutes at 180°C, while exhibiting good smoothness. Additionally, it allows for approximately 20-30% reduction in fuel consumption and CO2 emissions compared to typical powder coatings. 【Features】 ■ Excellent low-temperature curing ■ Significantly reduced baking time ■ Environmentally friendly (fuel consumption reduction, VOC-free, etc.) ■ Good smoothness ■ Flexible service support (custom colors from small quantities, short delivery times) *For more details, please download the PDF or feel free to contact us.
Epoxy/Polyester main component, matte type indoor powder coating.
"Ekona 53F/G" is a powder coating that allows for a uniform and smooth finish. It has passed the salt spray test for over 500 hours. The coating performance, including adhesion to various materials and corrosion resistance, is excellent, making it suitable for indoor decorative finishes such as steel furniture. Additionally, it does not use VOCs (volatile organic compounds), allowing for a reduction in substances subject to PRTR law management. 【Features】 - Epoxy/Polyester main component; matte type - Capable of achieving a uniform and smooth finish - Excellent coating performance in terms of adhesion to various materials and corrosion resistance - Environmentally friendly (no VOCs, etc.) - Flexible service support (short delivery times, etc.) *For more details, please download the PDF or feel free to contact us.
Design powder coating - matte leather-like indoor powder coating.
"Ekona 53J" is a powder coating that allows for a leather-like matte textured pattern simply by applying it uniformly within the standard film thickness range. It has passed the salt spray test for over 500 hours. The coating performance, including adhesion and corrosion resistance to various materials, is excellent, making it suitable for indoor decorative finishes. Additionally, it is free of VOCs (volatile organic compounds) and can reduce substances subject to PRTR (Pollutant Release and Transfer Register) regulations. 【Features】 ■ Epoxy polyester type with a matte leather finish ■ Uniform textured pattern with one coat and one bake ■ Excellent coating performance in adhesion and corrosion resistance to various materials ■ Non-silicone, no beading ■ Environmentally friendly (VOC-free, etc.) ■ Flexible service support (custom colors available from small quantities, etc.) *For more details, please download the PDF or feel free to contact us.
Decorative powder coatings and fine leather-like indoor powder coatings.
"Ekona 53L" is a powder coating that achieves a soft leather pattern simply by being applied uniformly, without the need for special techniques. It has passed the salt spray test for over 500 hours. The coating performance, including adhesion and corrosion resistance on various materials, is excellent, making it suitable for indoor decorative finishes. Being silicone-free and non-repellent, it can be used alongside other paints in the same work area. 【Features】 ■ Epoxy polyester type, fine leather texture ■ Uniform surface texture with one coat and one bake ■ Excellent coating performance, including adhesion and corrosion resistance on various materials ■ Silicone-free and non-repellent ■ Environmentally friendly (no VOCs, etc.) ■ Flexible service support (can accommodate specified colors from small quantities, etc.) *For more details, please download the PDF or feel free to contact us.
Double environmental performance with powder coating and low-temperature curing! Epoxy polyester type for indoor use.
"Econa 53N" is a powder coating that can accommodate materials that are difficult to bake at high temperatures, such as cast iron, due to its excellent low-temperature curing properties. The baking time is reduced to half compared to conventional powder coatings, with 20 minutes at 150°C and 10 minutes at 180°C. It exhibits good smoothness. Additionally, compared to typical powder coatings, it can achieve approximately 20-30% reduction in fuel consumption and CO2 emissions. 【Features】 ■ Epoxy polyester type ■ Excellent low-temperature curing properties ■ Significantly reduced baking time ■ Environmentally friendly (fuel consumption reduction, VOC-free, etc.) ■ Good smoothness ■ Flexible service support (accommodates a wide range of gloss specifications, etc.) *For more details, please download the PDF or feel free to contact us.
Polyester/urethane main component; high smoothness, thin film type powder coating.
"Ekona 55A" is a powder coating that excels in concealment, gloss, vividness, and smoothness with a thin film of 30μm. It forms a very smooth coating and allows for thin film application, significantly reducing the amount of paint used compared to conventional coatings. Additionally, it has no blurriness compared to traditional polyester powder coatings. With a gloss retention rate of 70% after 500 hours under a xenon lamp and passing the salt spray test for over 500 hours, its coating performance makes it suitable for a wide range of indoor and outdoor applications. 【Features】 ■ Main components: Polyester/Urethane ■ Excellent concealment, gloss, vividness, and smoothness with a 30μm thin film ■ Good coating performance in weather resistance and corrosion resistance ■ Environmentally friendly (no VOCs used, etc.) ■ Flexible service support (can accommodate specified jobs from small quantities, etc.) *For more details, please download the PDF or feel free to contact us.
Excellent paintability! High smoothness and thin film type indoor powder coating.
"Ekona 56A" is a powder coating that excels in smoothness and hiding power, allowing for a thin film finish. It has passed the salt spray test for over 500 hours. The coating performance, including adhesion to various materials and corrosion resistance, is excellent, making it suitable for indoor decorative finishes. Additionally, it is non-particle type, with no decrease in the ability to cover recessed areas, eliminating the need for correction work. It can be used with both corona electrostatic and tribo-electrostatic systems. 【Features】 ■ Epoxy polyester type ■ Excellent smoothness and hiding power, allowing for a thin film finish ■ Good coating performance, including adhesion to various materials and corrosion resistance ■ Good paint workability ■ Environmentally friendly (no VOCs used, etc.) ■ Flexible service support (can accommodate specified colors from small quantities, etc.) *For more details, please download the PDF or feel free to contact us.
Due to its excellent cutting oil properties, it is suitable for metal products such as machine tools and automotive parts! Main components are polyester and urethane.
The "Econa 52 Series" is a powder coating with excellent cut oil resistance, primarily composed of polyester and urethane. It allows for changes in gloss and design while maintaining performance. 【Features】 ■ Excellent corrosion resistance (from sheet metal to castings) ■ Free of VOCs, contributing to the reduction of substances managed under the PRTR law ■ Supports various colors, gloss levels, and patterns *For more details, please contact us or download the PDF.
Functional powder coatings that demonstrate significant effects on cutting oils! The 'Econa' series of powder coatings can be uniformly applied even to edge areas.
Our popular product line, the "Econa Series" of powder coatings, features polyester/urethane-based powder coatings that provide functionality (such as resistance to cutting oils and high corrosion resistance)! They demonstrate excellent effectiveness in protecting and maintaining the aesthetics of metal products used around machine tools, road materials, distribution boards, and outdoors. [Introducing each functional powder coating in the Econa Series!] [For high cutting oil resistance...] ⇒ Econa 52I ▶ Maintains high corrosion resistance from sheet metal to castings ▶ Pattern compatibility is also available as needed [For high weather resistance and high corrosion resistance...] ⇒ Econa 52Q ▶ Reduces processes and costs with a single coat ▶ High corrosion resistance and high weather resistance suitable for outdoor applications ▶ Free from VOCs (volatile organic compounds) [For edge cover areas...] ⇒ Econa 51C・H, Econa 52C・H ▶ Exhibits excellent edge rust prevention ▶ Superior salt damage corrosion resistance *For more details, please refer to the catalog in PDF format or feel free to contact us. *We can also flexibly accommodate gloss, matte, and patterning requests.
Protection of galvanized zinc, paint, concrete, steel plates, etc., and prevention of stickers and graffiti. It also suppresses the deterioration of painted surfaces, providing long-lasting performance with a clear coat!
Protection for galvanized, painted, concrete, and steel surfaces, as well as prevention of stickers and graffiti. It also suppresses the deterioration of painted areas and has excellent adhesion to the substrate, ensuring long-lasting performance. This is an easy-to-use clear coat for graffiti prevention. 【Features】 ◆ Suitable substrates: galvanized, painted, concrete, steel, etc. ◆ Applicable to substrates like galvanized surfaces. ◆ High water-repellent effect prevents water intrusion. ◆ Suppresses the deterioration of painted areas. *For more details, please download the PDF or feel free to contact us.
![[Introduction to Processing and Manufacturing Technology] "Surface Treatment Technology" that Enhances Products](https://image.mono.ipros.com/public/product/image/a01/2001489007/IPROS82147188699892121590.jpeg?w=280&h=280)
We perform electrostatic painting with a polyester-based powder coating that excels in weather resistance and adhesion!
We would like to introduce our "surface treatment technology" that enhances our products. We perform electrostatic painting using polyester-based powder coatings that excel in weather resistance and adhesion. The painting method employs a tribo system, allowing for relatively uniform coating even on products with significant unevenness. We have a proven track record of painting various metal products, including SPCC, zinc-coated steel sheets, SUS sheets, aluminum sheets, and ADC12, and these products are widely used in both indoor and outdoor environments. 【Features】 - Electrostatic painting using polyester-based powder coatings with excellent weather resistance and adhesion - Relatively uniform coating possible on products with significant unevenness using the tribo method - Proven track record of painting various metal products - Hand spray painting for polycarbonate resin and wood - Capable of small lot production by leveraging the characteristics of hand spraying *For more details, please refer to the related links or feel free to contact us.
Conductive (Electrostatic Discharge Protection) Powder Coating! Suitable for various metal components that require electrostatic discharge protection.
We would like to introduce our "Conductive (Static Electricity Prevention) Powder Coating." This type of powder coating is based on polyester-epoxy/hybrid systems and is suitable for static electricity prevention by imparting conductivity. The colors can be customized in shades such as black, gray (two shades: dark and light), green, and cream, and it is mainly designed for indoor use, making it suitable for applications such as clean room interiors and floor panels. 【Features】 ■ A type suitable for static electricity prevention by imparting conductivity ■ Colors can be customized in shades such as black, gray (two shades: dark and light), green, and cream *For more details, please refer to the PDF document or feel free to contact us.
High-quality paint that meets FDA standards is used! It is also possible to mix colors to the specified shade.
At Kyodo Seiki Co., Ltd., we employ a phosphated iron chemical conversion coating process in the pretreatment stage to enhance the adhesion of paint. Additionally, since the beginning of our powder coating operations, we have used paints that meet high safety standards, ensuring safety for coatings on food equipment, medical devices, and products for export. With advancements in powder coating technology, we now offer a wide variety of colors, and we can also mix paints to match your desired color. 【Features】 ■ Use of paints that meet FDA standards ■ Safe for food equipment, medical devices, and products for export ■ Ability to color powder coatings ■ Custom color mixing available ■ Paints stored year-round in a climate-controlled storage facility *For more details, please refer to the PDF materials or feel free to contact us.
Strong against scratches, high quality, and long-lasting, with consideration for people and the environment in its coating. This leads to a reduction in total costs!
At Kyodo Seiki Co., Ltd., we use paints that do not release VOCs (volatile organic compounds), which are factors of environmental pollution, and are considerate of both people and the environment. Powder coating has the characteristics of a thick film with few pinholes, making it resistant to rust, as well as excellent weather resistance, moisture resistance, and heat resistance. Furthermore, it is high quality and long-lasting, requiring less repainting, which reduces running costs and leads to a reduction in total costs. 【Features】 ■ Strong coating ■ Excellent rust prevention capability ■ Stable color tone ■ Diverse pattern design ■ Reduction of total costs *For more details, please refer to the PDF document or feel free to contact us.
